Lacerta OCTO focuser for refractors
incl. 27% VAT
Including 27% VAT:
332.84 € (134 800 HUF)Net price (for non-EU customers):
262.08 € (106 142 HUF)Stock avalability
Delivery:
Available for deliveryBudapest shop:
Stock refill in progress- 1 year warranty
- 2 years consumer warranty
Product code: OctoRefr
Lacerta OCTO focuser for refractors (guided on 8 pcs bearing, with 1:10 microfocus, M54 thread, 2" eyepiece-holder)
The Octo eyepiece extension series is being expanded further.
We now also have a rotating extension for refractors with 95mm adjustment range and 2 inches (50.8mm) free opening.
All 8 ball bearings can be adjusted independently of one another so that the extension tube runs optimally.
Further developed The original model BTrL has been further developed in the following points: - The focuser is guided on 8 ball bearings (previous model only had 4 ball bearings) - All 8 ball bearings can be adjusted independently of each other (previous model had no ball bearing adjustment option) - M54x0.75 internal thread (previous model ended in a 2 inch plug, which was not removable) - MFOC adaptation prepared on BOTH sides (previous model only had it on the microfocus side) Technical data: Eyepiece side connections: - M54x0.75 internal thread - Reduction to 2 inch eyepiece plug sleeve, - Further reduction to 1.25 inch eyepiece plug sleeve Telescope side connections: - 76mm dovetail mount from the inside (eyepiece focuser body including finder holder is rotatable) Minimum length: up to
M54x0.75 thread: 114mm up to 2-inch clamp: 138mm Maximum length: up to M54x0.75 thread: 209mm up to 2-inch clamp: 233mm Stroke / adjustment range: 95mm Total weight with all reductions: 1221 grams Free opening at the narrowest point of the light trap: 50.8mm (2 inches) Wall thickness of the extension tube: 4mm
More about the product
Low profile "Bearing Type" focuser with 8 ball bearings (for Newton)
At these very high loading capacity extracts, is the storage of the extension tube with eight ball bearings. The drive is available with Crayford shaft or with a classic rack, the latter principle has prevailed in the short excerpts built because the brake screw can be placed at the side and at the terminals there is no tipping. The Lacerta Newton extract with extra low profile works in this manner, we recommend it for high loads.
Ball-bearing "Bearing Type Linear" statements for SC
In this type, the extension tube is attached to the bottom rail on both sides out of two oversized ball bearings and held. Characterized in that the tube is supported only at the bottom or out, the construction can be carried out much more easily than a comparable Crayford focuser. The weight of the 2.7-inch refractors for linear statement is as about 30% lower than similar sized Crayford constructions. Eyepiece has the 2.7-inch refractor for linear pull a M74 external thread and a rotator with this, the connected equipment or the camera can be rotated smoothly and effortlessly into the desired position.
Please log in in order to be ablo to provide feedback!
Similar products
Discount


Stock avalability
Delivery:
Available for deliveryBudapest shop:
Limited stock (1 piece). Please contact our colleagues before ordering: +36-1-202-5651
Stock avalability
Delivery:
Available for deliveryBudapest shop:
Minimal stock
Stock avalability
Delivery:
Available for deliveryBudapest shop:
Limited stock (1 piece). Please contact our colleagues before ordering: +36-1-202-5651New Products

Our Latest News on Facebookon
