Delta Optical Stryker HD 1-6x24 IR DGMR

A scope designed specifically for IPSC and 3 GUN competitors in which the number of markers has been reduced to a minimum. Thanks to this solution, the shooter can focus only on the target. The range of the field of view (35.6-5.9m/100m) puts the scope among the world's leaders.

• It is equipped with only the most necessary MRAD markers allowing elevation correction    
• The thickness of the thin reticle line is only 0,11mrad 
• Thanks to the wire reticle, a small and bright illuminated aiming point was obtained even on sunny days    
• Turrets equipped with 0,1mrad click    
• The SFP scope has a reticle scaled to x6    
• Zeroing of the turrets is done without tools    
• The magnification knob is equipped with a lever for easy operation    
• It is possible to use an optional ballistic turret

Delta Optical Stryker HD 1-6x24 riflescope was designed for AR rifles for both dynamic shooting and recreational shooting competitors. Very large field of view (36m / 100m) at 1x multiplicity ensures equally fast target tracking as in open collimators but is more precise. The field of view puts this model at the forefront. In contrast to the collimators, the Delta Optical Stryker HD 1-6x24 telescope allows using the 6x magnification to recognize the target and make a precise shot at much further distances.

Closed turrets with a low profile protect against accidental adjustment of the crosshair settings. Zeroing the turrets does not require additional tools - after setting the reticle properly, just raise the turret knob, set to ZERO position and click back. The illuminated dot in the center of the cross ensures quick target tracking at close distances. To facilitate a quick change of magnification, the telescope has been equipped with a special screw-in adjustment lever.

The DSMR grid in the background does not change when you change the magnification, only the size of the target changes. Thanks to this, the sighting point at an example distance of 300m covers only 5.28 cm of target. Scaled at a 6x magnification, the grid in a metric system with 1 MRAD increments (10cm / 100m) gives the possibility of quickly applying elevation corrections and wind / derivation corrections, as well as allows estimating the distance to the target. The telescope is designed in Poland and manufactured in Japan using aviation aluminum alloys.